PRODUCT INFORMATION

TJM’s Outback Bar for the new Toyota Landcruiser 79 Series has arrived! To compliment Toyota’s update on the much loved workhorse, TJM’s 79 Series Outback Bar has been revamped with an enhanced design and features to match. With a new bonnet design increasing aesthetics, the new Outback Bar has been redeveloped to suit Toyota’s aesthetic changes while still maintaining TJM’s legendary level of damage deflection in case of an animal strike. Equip your 79 series with TJM’s Outback Bar and have peace of mind knowing that your pride and joy is enjoying the maximum level of protection available.

OutBar79s2017_2

 

FEATURES
  • 63mmø tubing
  • Steel construction
  • Innovative styling to complement the 79 Series unique design
  • Full cato straps, uniquely styled to the vehicle for incredible strength and damage deflection
  • Designed for optimal approach angle
  • 8000kg rated recovery points as standard*
  • Integrated LED fog lights
  • Flush steel mounted LED combination lights with tough polycarbonate lenses
  • Reinforced recovery jack points (suits the TJM recovery jack)
  • Integrated winch mount (TJM recommends fitment up to TJM Torq 12,000lb electric winches)
  • Accommodates large driving lights
  • Provision for fitment of dual aerials
  • Airbag compatible and ADR compliant
  • Does not void your new vehicle warranty
  • Plug and play wiring available separately – Part Number: 076WLKIT010

*Rated points rated to 8000kg in a straight line pull only when used with an 8000kg equaliser strap and
2 x 4.75T bow shackles

OutBar79s2017_3


PROTECTION AGAINST COSTLY REPAIRS & POOR PERFORMANCE

Direction plus, ProVent oil separator kits protect your modern diesel engine by sustainably reducing the amount of oil entering the engine from blow-by gas in the crankcase ventilation system.

The problem is compounded with modern engines fitted with exhaust gas recirculation systems (EGR) where by a proportion of the exhaust gas is routed back into the engine. With the presence of oil from the crankcase ventilation system, the oil collects the exhaust particles. The combination of oil and exhaust particles from the EGR build up to a point where it blocks inlet manifolds and valves, resulting in reduced engine performance or failure.

Provent_1

By not fitting a Direction Plus ProVent system, it is likely that your engine will experience a progressive reduction in performance. The images below are typical examples of the build-up in engines not fitted with a Direction Plus ProVent system.

Direction Plus ProVent systems, are specifically designed for its ability to separate and redirect oil and air from blow-by gas produced from within the crank case. The Direction Plus ProVent system also provides the option of returning the oil back to the sump.

For the ultimate defence against oil and soot contamination, investing in a Direction Plus ProVent oil separator kit will protect your investment 24 hours a day, 365 days a year.

FEATURES
  • Prevent oil and soot contamination entering the clean air intake
  • Excellent protection for turbocharger
  • Minimises oil consumption*
  • Prevent oil build up in intercoolers
  • Regulates crankcase pressure
  • Keeps critical engine components clean
  • Reduces exhaust smoke and odours
  • Save you money

* only in installations where the oil is returned to the sump

PROVENT 150

The ProVent 150 is a compact crankcase ventilation unit for engines up to 200 kW and is characterised by the following advantages:Provent150_2

  • Ultra-compact design
  • Up to 150 l/min blow-by gas
  • Equipped as standard with high-efficiency medium
  • Pressure regulation
  • Suitable for use as an open or closed CCV
PROVENT 200

The ProVent 200 is a compact crankcase ventilation system for engines up to 250 kW and is characterised by the following advantages:Provent200_2

  • Up to 200 l/min blow-by gas
  • Very compact design
  • Equipped as standard with high-efficiency medium
  • Integrated pressure regulation for crankcase
  • Suitable for use as an open or closed CCV

LOOKING FOR A DOUBLE SHELL CANOPY THAT’S TWICE AS STRONG?

Aeroklas mould the inner and outer shells together to bring you twice the strength and durability of a single skinned canopy, making them the toughest on the market.

Aeroklas canopies are light weight and feature high impact resistance and the ability to reshape after impact.

Available for dual and space cabs, Aeroklas’s twin skinned canopies are made from 100% recyclable ABS.

Aeroklas canopies are painted using OE quality paint so they perfectly match your vehicle. This paint includes UV protection so your paint will remain pristine for years to come within any environmental condition.

LED illuminated lights are included in all models. Central locking available for most models. See canopy guide below for list of inclusions.

SPECIAL OFFER  –  SAVE $400

  • Twice the strength of a single skin canopy
  • Light weight
  • Colour coding included

Offer Ends 31st March, 2017. T&C’s Apply.

View Canopy Guide Features here.

About Aeroklas Australia here.

Aeroklas_cashback_6 Aeroklas_cashback_3Aeroklas_cashback_4 Aeroklas_cashback_5

 


TJM’s 63mmØ air bag compatible (ABC) side bars and steps are available for your LandCruiser 200 Series. An extensive engineering development and testing program was undertaken to ensure optimal performance for off road driving and user operation while still providing maximum vehicle safety compliance. In the event of a side impact accident, the unique design of the TJM ABC side step mounts provide a crumple zone that stops the vehicle from deploying air bags unnecessarily. Unnecessary deployment of air bags can cause injury and significant repair costs for the end user. TJM ensures the safety of the end user by engineering accessories in compliance with vehicle OE safety systems.

 

SideBarSteps200s2015_2

FEATURES
  • 63mmØ steel tubing
  • Styled to complement the LandCruiser’s unique design
  • Chassis mounted heavy duty system for increased strength and protection
  • Air bag compatible mounting system does not void your new vehicle warranty
  • Provides unrivalled wheel arch, flare, sill & panel protection
  • Durable, light weight aluminium checker plates will not rust and provide easy access to and from the cab, as well as added side protection
    Note:  TJM side steps are supplied with a hard wearing black powder coat.

 

 

SideBarSteps200s2015_3


Following on from TJM’s most popular release in 2016, the bumper cut model of the TJM Outback Bar for the Toyota LandCruiser 200 Series is coming soon! Landing in March, you’ll get all the standard features known and loved in the Outback Bar in bumper cut form for your new 200 Series. Developed from countless hours of Australian engineering, design and testing to create a highly aesthetic bar with optimum performance, TJM’s Outback Bar is undoubtedly one of the finest bull bars available on the market.

 

Out_200s_2015_2

 

 

FEATURES
  • 63mmø tubing
  • Steel construction
  • Bumper cut design
  • Innovative styling to complement the LandCruiser’s unique design
  • Wing underguards and centre guard
  • Full cato straps, uniquely styled to the vehicle for incredible strength and damage deflection
  • Designed for optimal approach angle
  • 8000kg Rated Recovery Points as standard*
  • Integrated LED fog lights
  • Flush steel mounted LED combination lights with tough polycarbonate lenses
  • Reinforced T-Slot recovery jack points (suits the TJM Recovery Jack)
  • Integrated winch mount (TJM recommends fitment up to TJM Torq 12,000lb synthetic winches)
  • Accommodates large driving lights (up to 220mm)
  • Provision for fitment of dual aerials
  • Airbag compatible and ADR compliant
  • Does not void your new vehicle warranty
  • Plug and play wiring available separately – Part Number: 076WLKIT009
  • Head light washer kit available separately – Part Number: 076HWKIT001
  • Parking sensor blanking plugs available separately – Part Number: 076SKITA82C
  • Rated points rated to 8000kg in a straight line pull only when used with an 8000kg equaliser strap and 2 x 4.75T bow shackles

 

 

Out_200s_2015_3


The TJM Outback Bar has arrived for the Holden Trailblazer! TJM’s most popular Bull Bar design is now available for Holden’s latest 4WD wagon release. Developed from countless hours of Australian engineering, design and testing, TJM’s Outback Bar is the ultimate accessory to equip your new car for your family’s safety. To compliment Holden’s fresh new take on the Colorado 7, TJM have created the new look bar for the 2016+ Trailblazer without compromising the exceptional quality the Outback Bar is known for.

 

 

OutTrail_2

 

 

FEATURES
  • Steel construction
  • 50mmØ tubing
  • Innovative styling to complement the Trailblazer’s unique design
  • Wing underguards and centre guard
  • Full cato straps, uniquely styled to the vehicle for incredible strength and damage deflection
  • Designed for optimal approach angle
  • Integrated LED fog lights
  • Flush steel mounted LED combination lights with tough polycarbonate lenses
  • Reinforced recovery jack points (suits the TJM recovery jack)
  • Integrated winch mount (TJM recommends fitment up to TJM Torq 9,500lb cable and synthetic winches)
  • Accommodates large driving lights (up to 220mm)
  • Provision for fitment of dual aerials
  • Parking sensor compatible
  • Airbag compatible and ADR compliant
  • Does not void your new vehicle warranty
  • Plug and play wiring available separately – Part Number: 076WLKIT016

OutTrail_3