TJM XGS SERIES 4000 SUSPENSION KIT HOLDEN TRAILBLAZER 2016+

PRODUCT INFORMATION

Whether you’re tackling corrugated roads, rough terrain, or planning to tow a caravan across the country, you can’t go past a TJM XGS Series 4000 Suspension Kit to improve every aspect of your drive. You’ll be equipped for a smoother, more comfortable ride while also improving road handling, braking ability, noise and vibration.  4WD’s have factory engineered suspension, but it’s usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. Installing a set of shock absorbers, a pair of springs or a full TJM XGS Series 4000 suspension kit will immediately transform your vehicle’s ride handling, load carrying and towing capabilities. Don’t forget to chat with your local TJM distributor about your individual suspension needs.

2016trails4000_3

FEATURES & BENEFITS
  • 25-30mm lift2016trails4000_4
  • Conforms to VSB14
  • 40mm Bore piston
  • Increased ground clearance & carrying capacity
  • Tested & compliant to Australian standards
  • Increased oil capacity which reduces shock fade
FRONT SPRING OPTION AVAILABLE

Raised / 25-30mm lift
660lbs/in, 355mm free height

REAR SPRING OPTION AVAILABLE

Raised -100kg / 25-30mm lift
260lbs/in, 405mm free height

  • XGS 40mm big bore piston shock absorbers deliver improved
    durability, less fade and better cooling over OE resulting in more
    consistent damping performance
  • XGS shock absorbers will provide improved body control and comfort
    when paired with XGS raised springs
  • Field tested both on and off road to deliver the perfect suspension
    solution
  • Note: For more information on the TJM XGS S4000 suspension range please refer to the
    TJM Suspension Application Guide

2016trails4000_2

TJM AIRTEC WEDGETAIL SNORKEL FOR MOST MAKES AND MODELS

PRODUCT INFORMATION

Snorkels are commonly the first accessory ever fitted to a four wheel drive. They assist with deep water crossings and provide hassle free air induction when immersed in dust. Air is cooler and cleaner at roof level than air travelling via the bonnet, which means greater fuel efficiency and less clogging of air filters. These are important factors, particularly when 4WDing on dry, dusty roads.

TJM Airtec snorkels are manufactured at the highest level. All products are made with leading Australian polymer materials that exceed the Australian Standard for UV stabilisation of UV8, with ratings at UV20-UV24. The colour pigmentation process doesn’t cut any corners either, giving you an even, dense and bleed-free product.

Unlike other manufacturers, TJM engineer and design the snorkel individually to suit the natural shape of the vehicle. Although functionality is important, we want you to look good too! Proudly Australian made and quality assured, you can have the confidence that a TJM Airtec snorkel will achieve peak performance each and every time.

airtec_wedgetail_2

EVERY 4WD SHOULD ENJOY THE AIRTEC ADVANTAGE
  • Fitting a TJM Airtec snorkel allows air to be drawn from roof level providing a continuous supply of cooler and cleaner air to the engine
  • Because the air supply is drawn from roof level, dust is not as thick and plentiful in the engine bay or inner guard. This will help extend the life of the air cleaner element, reducing the wear of vital components
  • With the positively sealed TJM Airtec snorkel well above water level, you can expect worry free water crossings

airtec_wedgetail_4

HOW A TJM AIRTEC SNORKEL DISPERSES RAIN WATER
  • Rain water droplets entering the air ram of a TJM Airtec snorkel are captured at the back of the inside curved surface, pooled
    around the base of the air ram and dispersed through the drain holes
  • On the off chance that any minute rain water droplets find their way into the snorkel body, they will be atomised at the air filter
  • Finally, the last line of defence for water dispersion is the original water drain in the vehicle’s air cleaner assembly

RELEASE DATE: DECEMBER 2016

airtec_wedgetail_3

TJM SIGNATURE BAR TOYOTA HILUX 2015+

PRODUCT INFORMATION

TJM’s Signature bar for the new Toyota Hilux incorporates a new high-flow grille system to ensure the latest generation Toyota powertrain receives as much air flow as possible while still maintaining ultimate strength in the event of an animal strike. The unique design is signified by a strong centre loop, accompanied by two refined side loops protecting the headlights. This bar is light weight, strong and looks the part too. Adding guaranteed class to your 4WD, the TJM Signature bar is sure to make others green with envy.
TJM engineers have spent countless hours perfecting the Signature design to ensure you’re equipped with one of the finest bull bars available in the market. TJM bull bars are put through a comprehensive design criteria and testing process to ensure that all TJM bars are airbag compatible and ADR compliant.

sig_bar_hilux_2015_2

FEATURES & BENEFITS
  • Highly polished 76mmø centre tube & 63mmø outer tubing
  • Alloy construction, engineered and manufactured for the toughest conditions
  • Innovative styling to complement the Hilux’s unique design
  • Wing under guards and centre guard
  • Designed for optimal approach angle
  • 8000kg rated recovery points as standard*
  • Integrated LED fog lights (fog lights, wiring harness & switches included)
  • Flush steel mounted LED combination lights with tough polycarbonate lenses
  • Integrated winch mount (TJM recommends fitment up to TJM Torq 9,500lb cable and synthetic winches)
  • The unique grille system hinges down from the sides to allow uninhibited access to the winch ends
  • Accommodates large driving lights up to 220mm
  • Provision for fitment of dual aerials
  • Airbag compatible and ADR compliant
  • Does not void your new vehicle warranty

*Recovery points rated to 8000kg in a straight line pull when used with an 8000kg equaliser strap and
2 x 4.75T bow shackles

RELEASE DATE: DECEMBER 2016

sig_bar_hilux_2015_3

PRE-RELEASE TJM AIRTEC SNORKEL MITSUBISHI PAJERO SPORT 2016+

INORMATION

Snorkels are commonly the first accessory ever fitted to a four wheel drive. They assist with deep water crossings and provide hassle free air induction when immersed in dust. Air is cooler and cleaner at roof level than air travelling via the bonnet, which means greater fuel efficiency and less clogging of air filters.  These are important factors, particularly when 4WDing on dry, dusty roads.
TJM Airtec snorkels are manufactured at the highest level. All products are made with leading Australian polymer materials that exceed the Australian Standard for UV stabilisation of UV8, with ratings at UV20-UV24.  The colour pigmentation process doesn’t cut any corners either, giving you an even, dense and bleed-free product.  Unlike other manufacturers, TJM engineer and design the snorkel individually to suit the natural shape of the vehicle. Although functionality is important, we want you to look good too!
Proudly Australian made and quality assured, you can have the confidence that a TJM Airtec snorkel will achieve peak performance each and every time.

RELEASE DATE:

pajairtec_2